Related Manuals for Westinghouse WHXC8500E-AS
Summary of Contents for Westinghouse WHXC8500E-AS
- Page 1 Portable Generator Instruction Manual Supplement WHXC8500E-AS Electrical Connection to the Generator Output Terminals...
- Page 3 SAFETY DANGER This Instruction Manual Supplement contains important instructions for operating the Westinghouse WHXC8500E-AS generator. For your safety and that of others, be sure to read both the main Instruction Manual and this Supplement thoroughly before operating the generator. Failure...
-
Page 4: Work Procedure
INTRODUCTION The maximum electric current that can be delivered continuously from this direct connection is 28.1 A, The Westinghouse WHXC8500E-AS generator as which corresponds to the generator’s maximum originally supplied is configured for connection to continuous running power output of 6,750 W. - Page 5 CONNECTION 3. Remove the snap-on cover from the right-hand- side 240-Volt AC socket only using a small flat blade screwdriver (see Figure S3). Figure S5 – Withdrawing the 240-Volt AC Socket 6. Disconnect the active, neutral and earth wires from the socket by unscrewing the wire terminals Figure S3 –...
- Page 6 CONNECTION Figure S7 – Pre-assembling the Cable, Gland, Figure S9 – Affixing the Gland Plate Gland Plate and Mounting Gasket to the Control Panel 8. Connect the generator’s active, neutral and earth 10. The other end of the cable MUST be safely wires to the corresponding cable conductors terminated BEFORE the generator can be using your preferred method, e.g.
- Page 8 Parkinson QLD 4115 Australia westinghouseoutdoorpower.com.au © 2019 All rights reserved. Content may change without notice. , Westinghouse, and INNOVATION YOU CAN BE SURE OF are trademarks of the Westinghouse Electric Corporation used under license by Westinghouse Outdoor Power Equipment, LLC.
Need help?
Do you have a question about the WHXC8500E-AS and is the answer not in the manual?
Questions and answers