Table of Contents
Advertisement
Notes
Troubleshooting
Problem
The oven does not work.
26
Shimmering metallic discolourations on the hob: This
is caused by pan abrasion or the use of unsuitable
cleaning agents. This is difficult to remove. Try using
Hob Clean or Sidol for ceramic and steel.
Enamel in the oven is baked on at very high
temperatures. This can cause some slight colour
variation. This is normal and does not affect the
function. Do not use coarse scouring pads or strong
cleaning agents to remove such discolourations.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
Anti corrosion protection is guaranteed.
Should a malfunction occur, it is often only due to a
minor fault. Please read the following instructions
before calling the after sales service:
Possible cause
Blown fuse.
Power cut
Repairs may only be carried out by fully trained
after-sales service technicians.
Improper repairs may constitute serious hazards to
the user.
Comments/remedy
Look in the fuse box and check that the
fuse is in working order.
Check whether the kitchen light
switches on.
Advertisement
Table of Contents
