Table of Contents
Advertisement
Installing
24
or
4.
Unscrew the large clips on the left and right and
remove them (Fig. C). Remove the middle panel.
5.
Remove the two clips from the lower glass panel
and remove the panel upwards at an angle (Fig.
C).
Clean the glass panel with glass cleaner and a soft
cloth.
Do not use sharp tools or abrasive cloths or cleaners.
The glass scraper should not be used for this
purpose.
Make sure that the Right above" text is upside down
at the bottom left of both panels.
1.
Insert the lower glass panel at an angle towards
the rear (Fig. D).
2.
Position the small clips on the left and right of the
lower panel.
3.
Slide in the middle glass panel (Fig. E).
Advertisement
Table of Contents
