Network Setup - Planet WPG-200N User Manual

4.3.2. Network Setup

This page is used to configure the parameters for local area network which connects to the LAN port or
wireless interface. Here you may change the setting for IP address, subnet mask, DHCP, etc..
The page includes the flowing detail fields:
Object
IP Setup
Obtain IP address
automatically
PLANET 802.11n Wireless Presentation Gateway
Figure 4-7
Description
If you select this option, the WPG-200N will detect the network
environment automatically.
When WPG-200N is connected to a LAN that has DHCP
server, the clients of WPG-200N will be assigned an IP by that
server and the built-in DHCP server of WPG-200N will be
disabled. However, when the WPG-200N is connected to a
LAN that does not have any DHCP server, the built-in DHCP
33