Table of Contents
Advertisement
Step 2.
When the projector shows the default screen as below, it indicates WPG-200N is ready now.
If the screen is out of range, please turn off the projector or monitor first. Then
turn on the projector or monitor again to reset the configuration.
Step 3.
User your laptop or desktop to site survey the wireless signal of WPG-200N, and connect your PC
with it wirelessly. The default SSID is WPG-200N.
PLANET 802.11n Wireless Presentation Gateway
Figure 2-4 Projector default screen
13
Advertisement
Table of Contents
