Table of Contents
Advertisement
Use the following IP
address
DHCP Server Setup
Auto
Disable
Wireless Setup
Wireless LAN
Region
SSID Broadcast
Channel
Encryption
Key
AP Client
Connect to Existing AP
PLANET 802.11n Wireless Presentation Gateway
server of WPG-200N will be enabled and the clients of
WPG-200N will obtain IP address by itself.
Or you can select this option to use the fixed IP address for
WPG-200N. (Default Settings)
IP Address
The default value is 192.168.1.1
Subnet Mask
The default value is 255.255.255.0
Default Gateway
The default value is 192.168.1.1
DNS Server
The default value is 192.168.1.1
Select "Auto" to enable the built-in DHCP server of
WPG-200N. (Default Settings)
Start IP
The default value is 192.168.1.11
End IP
The default value is 192.168.1.254
Subnet Mask
The default value is 255.255.255.0
Default Gateway
The default value is 192.168.1.1
DNS Server
The default value is 192.168.1.1
Or you can select this option to disable the DHCP server of
WPG-200N.
The option for enabling or disabling wireless LAN function
Embedded AP
You can configure the SSID string here
SSID
when Wireless LAN is enabled.
The default value is "Worldwide".
The default value is "Enable".
If you select "Auto", the WPG-200N will scan all of the wireless
channels and choose a clear one automatically. Or you can
select a fixed channel.
The option of wireless security. You can select one of WEP /
WPA / WPA2, or disable it.
The wireless security of WPG-200N supports
AES (Advanced Encryption Standard).
If Encryption is enabled, you have to set the key according to
the encryption mode you selected.
The option for enabling or disabling AP client mode. By this
feature you can join other Access Point wirelessly. And LAN
34
Advertisement
Table of Contents
