Table of Contents
Advertisement
Broadband Router User Guide
Physical Details
Front-mounted LEDs
Power
ON - power on
OFF - no power
Status (Red)
Blinks during start up.
ON indicates an error condition.
WAN: Link
ON - WAN connection is established.
OFF - no WAN connection.
WAN: Act
Flashing - data is being transmitted or received via the WAN port.
OFF - no data is being transferred.
LAN: Act
There are 7 LEDs - one for each LAN port, and each LED could be OFF,
Yellow, or Green.
•
OFF - No LAN connection on this port.
•
Yellow - 10BaseT connection.
•
Green - 100BaseT connection.
LAN:
ON indicates the LAN connection is using Full Duplex.
Half/Full
OFF indicates the LAN connection (if any) is using Half Duplex.
Duplex
Flashing indicates packet collisions in Half-Duplex mode. It is normal to
have occasional collisions.
Print Error
ON - Printer error detected.
OFF - No printer error detected.
•
OFF - no connection to printer.
Print Act
•
ON - Connection to printer established.
•
Flashing - Data is being transmitted to the printer.
4
Advertisement
Table of Contents
