Table of Contents
Advertisement
•
PCs which are "DHCP Clients" are automatically added to the database, and updated as
required.
•
By default, non-Server versions of Windows act as "DHCP Clients"; this setting is called
"Obtain an IP Address automatically".
•
The Broadband Router uses the "Hardware Address" to identify each PC, not the name or
IP address. The "Hardware Address" can only change if you change the PC's network card
or adapter.
•
This system means you do NOT need to use Fixed (static) IP addresses on your LAN.
However, you can add PCs using Fixed (static) IP Addresses to the PC database if required.
Data - PC Database Screen
PC Database
This lists all current entries. Data displayed is name (IP Address) type.
PCs
For this model, the "type" will always be "LAN"
Name
If adding a new PC to the list, enter its name here. It is best if this
matches the PC's "hostname".
IP Address
Enter the IP Address of the PC. The PC will be sent a "ping" to
determine its hardware address. If the PC is not available (not
connected, or not powered On) you will not be able to add it.
Buttons
Add
This will add the new PC to the list. The PC will be sent a "ping" to
determine its hardware address. If the PC is not available (not
connected, or not powered On) you will not be able to add it.
Delete
Delete the selected PC from the list. This should be done in 2
situations:
•
•
Refresh
Update the data on screen.
Generate Report
Display a read-only list showing full details of all entries in the PC
database.
The PC has been removed from your LAN.
The entry is incorrect.
Advanced Configuration
59
Advertisement
Table of Contents
