Table of Contents
Advertisement
Appendix A
Troubleshooting
This Appendix covers the most likely problems and their solutions.
Overview
This chapter covers some common problems that may be encountered while using the
Broadband Router and some possible solutions to them. If you follow the suggested steps and
the Broadband Router still does not function properly, contact your dealer for further advice.
General Problems
Problem 1:
Can't connect to the Broadband Router to configure it.
Solution 1:
Check the following:
•
The Broadband Router is properly installed, LAN connections are OK,
and it is powered ON.
•
Ensure that your PC and the Broadband Router are on the same network
segment. (If you don't have a router, this must be the case.)
•
If your PC is set to "Obtain an IP Address automatically" (DHCP
client), restart it.
•
If your PC uses a Fixed (Static) IP address, ensure that it is using an IP
Address within the range 192.168.0.2 to 192.168.0.254 and thus
compatible with the Broadband Router's default IP Address of
192.168.0.1.
Also, the Network Mask should be set to 255.255.255.0 to match the
Broadband Router.
In Windows, you can check these settings by using Control Panel-
Network to check the Properties for the TCP/IP protocol.
Internet Access
Problem 1:
When I enter a URL or IP address I get a time out error.
Solution 1:
A number of things could be causing this. Try the following troubleshooting
steps.
•
Check if other PCs work. If they do, ensure that your PCs IP settings are
correct. If using a Fixed (Static) IP Address, check the Network Mask,
Default gateway and DNS as well as the IP Address.
•
If the PCs are configured correctly, but still not working, check the
Broadband Router. Ensure that it is connected and ON. Connect to it
and check its settings. (If you can't connect to it, check the LAN and
power connections.)
•
If the Broadband Router is configured correctly, check your Internet
connection (DSL/Cable modem etc) to see that it is working correctly.
A
68
Advertisement
Table of Contents
