Table of Contents
Advertisement
1.3 Physical Details
Front Panel of VC-230
Front Panel LED definition
LED
State
ON
When the router is powered on, and in ready state.
PWR
OFF
When the router is powered off.
Flashing Router is trying to establish a VDSL2 connection to VDSL2 device or telecom's network.
DSL
ON
The VDSL2 connection connected successfully.
Flashing Data is being transmitted or received via the corresponding LAN port.
LAN1-4
ON
The port is up.
Rear Panel of VC-230
Rear Panel Port and Button Definition
Connector
POWER
Power connector with 12V DC 1 A
RESET
Press more than 3 seconds for reset to factory default setting.
Router is successfully connected to a device through the corresponding port (1, 2, 3, or 4). If
LAN (1-4)
the LED light of LNK/ACT is flashing, the Router is actively sending or receiving data over that
port.
PHONE
Built-in splitter for POTS connection.
The RJ-11 connector allows data communication between the router and the VDSL2 network
VDSL2
through a twisted-pair phone wire
Description
Description
9
Advertisement
Table of Contents
