Configuration Program - Planet XRT-711A User Manual

Internet broadband
Table of Contents

Advertisement

Broadband Router User Guide

Configuration Program

The Broadband Router contains an HTTP server. This enables you to connect to it, and
configure it, using your Web Browser. Your Browser must support JavaScript. The
configuration program has been tested on the following browsers:
Netscape V4.08 or later
Internet Explorer V4 or later
Preparation
Before attempting to configure the Broadband Router, please ensure that:
Your PC can establish a physical connection to the Broadband Router. The PC and the
Broadband Router must be directly connected (using the Hub ports on the Broadband
Router) or on the same LAN segment.
The Broadband Router must be installed and powered ON.
If the Broadband Router's default IP Address (192.168.0.1) is already used by another
device, the other device must be turned OFF until the Broadband Router is allocated a new
IP Address during configuration.
Connecting to the Broadband Router
Using UPnP
If your Windows system supports UPnP, an icon for the Broadband Router will appear in the
system tray, notifying you that a new network device has been found, and offering to create a
new desktop shortcut to the newly-discovered device.
Unless you intend to change the IP Address of the Broadband Router, you can accept the
desktop shortcut.
Whether you accept the desktop shortcut or not, you can always find UPnP devices in My
Network Places (previously called Network Neighborhood).
Double - click the icon for the Broadband Router (either on the Desktop, or in My Network
Places) to start the configuration. Refer to the following section Setup Wizard for details of
the initial configuration process.
Using your Web Browser
To establish a connection from your PC to the Broadband Router:
1.
After installing the Broadband Router in your LAN, start your PC. If your PC is already
running, restart it.
2.
Start your WEB browser.
3.
In the Address box, enter "HTTP://" and the IP Address of the Broadband Router, as in
this example, which uses the Broadband Router's default IP Address:
HTTP://192.168.0.1
10

Advertisement

Table of Contents
loading

Table of Contents