Table of Contents
Advertisement
Data - Routing Screen
RIP
Enable RIP
Check this to enable the RIP (Routing Information Protocol) feature
of the Broadband Router.
The Broadband Router supports RIP 1 only.
Static Routing
Static Routing
This list shows all entries in the Routing Table.
Table Entries
•
•
•
Properties
•
•
•
Figure 40: Routing Screen
The "Properties" area shows details of the selected item in the
list.
Change any the properties as required, then click the "Update"
button to save the changes to the selected entry.
Destination Network - The network address of the remote LAN
segment. For standard class "C" LANs, the network address is
the first 3 fields of the Destination IP Address. The 4th (last)
field can be left at 0.
Network Mask - The Network Mask for the remote LAN
segment. For class "C" networks, the default mask is
255.255.255.0
Gateway IP Address - The IP Address of the Gateway or Router
which the Broadband Router must use to communicate with the
destination above. (NOT the router attached to the remote
segment.)
Metric - The number of "hops" (routers) to pass through to reach
the remote LAN segment. The shortest path will be used. The
default value is 1.
Advanced Configuration
65
Advertisement
Table of Contents
