Options - Hawking HWR54G User Manual

Options

This screen allows advanced users to enter or change a number of settings. For normal
operation, there is no need to use this screen or change any settings.
An example Options screen is shown below.
Data - Options Screen
Backup DNS
Enter the IP Address of the DNS (Domain Name Servers) here. These
IP Address
DNS will be used only if the primary DNS is unavailable.
TFTP
•
Enable
Firmware
Upgrade using
•
TFTP
UPnP
•
Enable UPnP
Services
•
•
Figure 41: Options Screen
If enabled, TFTP (Trivial FTP) can be used to upgrade the
firmware in this device. This is normally not required; a Windows
utility is available for this purpose.
You must obtain the firmware upgrade file first; instructions for
using TFTP will be available with the upgrade.
UPnP (Universal Plug and Play) allows automatic discovery and
configuration of equipment attached to your LAN. UPnP is by
supported by Windows ME, XP, or later.
If Enabled, this device will be visible via UPnP.
If Disabled, this device will not be visible via UPnP.
Advanced Configuration
69