Hawking HWR54G User Manual page 42

Wireless Router User Guide
Data - Status Screen
Internet
Connection Method
Broadband Modem
Internet Connection
Internet IP Address
"Connection Details"
Button
LAN
IP Address
Network Mask
DHCP Server
System
Device Name
Firmware Version
Buttons
Connection Details
System Data
Restart
Refresh Screen
This indicates the current connection method, as set in the Setup
Wizard or WAN Port screen.
This shows the status of the connection from the Wireless Router
to the Broadband Modem.
Current connection status:
•
Active
•
Idle
•
Unknown
•
Failed
If there is an error, you can click the "Connection Details" button
to find out more information.
This IP Address is allocated by the ISP (Internet Service
Provider). If there is no current connection, this will be blank or
0.0.0.0.
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "Connection Log" may also be available.
The IP Address of the Wireless Router.
The Network Mask (Subnet Mask) for the IP Address above.
This shows the status of the DHCP Server function - either
"Enabled" or "Disabled".
For additional information about the PCs on your LAN, and the
IP addresses allocated to them, use the PC Database option on
the Administration menu.
This displays the current name of the Wireless Router.
The current version of the firmware installed in the Wireless
Router.
View the details of the current Internet connection. The sub-
screen displayed will depend on the connection method used. See
the following sections for details of each sub-screen.
Display all system information in a sub-window.
Clicking this button will restart (reboot) the Wireless Router. All
existing connections though the Wireless Router will be
terminated, but will usually re-connect automatically.
Update the data displayed on screen.
36