Services Screen - Hawking HWR54G User Manual

Services Screen

This screen is displayed when the Edit Service List button on the Access Control screen is
clicked.
Data - Services Screen
Available Services
This lists all the available services.
Available Services
"Delete" button Use this to delete any Service you have added. Pre-defined Services
can not be deleted.
Add New Service
Name Enter a descriptive name to identify this service.
Select the protocol (TCP, UDP, ICMP) used to the remote system or
Type
service.
Start Port For TCP and UDP Services, enter the beginning of the range of port
numbers used by the service. If the service uses a single port number,
enter it in both the "Start" and "Finish" fields.
Finish Port For TCP and UDP Services, enter the end of the range of port
numbers used by the service. If the service uses a single port number,
enter it in both the "Start" and "Finish" fields.
For ICMP Services, enter the type number of the required service.
ICMP Type
Buttons
Delete the selected service from the list.
Delete
Figure 30: Access Control - Services
Advanced Features
49