Using A Special Application - Hawking HWR54G User Manual

Data - Special Applications Screen
Use this to Enable or Disable this Special Application as required.
Checkbox
Enter a descriptive name to identify this Special Application.
Name
•
Type - Select the protocol (TCP or UDP) used when you receive data
Incoming
from the special application or service. (Note: Some applications use
Ports
different protocols for outgoing and incoming data).
•
Start - Enter the beginning of the range of port numbers used by the
application server, for data you receive. If the application uses a single
port number, enter it in both the "Start" and "Finish" fields.
•
Finish - Enter the end of the range of port numbers used by the
application server, for data you receive.
•
Type - Select the protocol (TCP or UDP) used when you send data to
Outgoing
the remote system or service.
Ports
•
Start - Enter the beginning of the range of port numbers used by the
application server, for data you send to it. If the application uses a
single port number, enter it in both the "Start" and "Finish" fields.
•
Finish - Enter the end of the range of port numbers used by the
application server, for data you send to it. If the application uses a
single port number, enter it in both the "Start" and "Finish" fields.

Using a Special Application

•
Configure the Special Applications screen as required.
•
On your PC, use the application normally. Remember that only one (1) PC can use each
Special application at any time. Also, when 1 PC is finished using a particular Special
Application, there may need to be a "Time-out" before another PC can use the same
Special Application. The "Time-out" period may be up to 3 minutes.
Multi-DMZ
This feature, if enabled, allows the DMZ computer or computers on your LAN to be exposed
to all users on the Internet.
•
This allows almost any application to be used on the "DMZ PC".
•
The "DMZ PC" will receive all "Unknown" connections and data.
•
If the DMZ feature is enabled, you must select the PC to be used as the "DMZ PC".
If you have multiple Internet IP addresses, you can assign one DMZ PC for each Internet IP
address.
If you only have 1 WAN IP addresses, only "DMZ 1" can be used, and only one (1) PC can be
the DMZ PC.
If an application still cannot function correctly,
try using the "DMZ" feature.
Advanced Features
55