Chapter 2 Installation; Requirements; Procedure - Hawking HWR54G User Manual

802.11g hi-speed wireless-g router with 4-port switch

Hide thumbs Also See for HWR54G:

Table of Contents

Chapter 2

Installation

This Chapter covers the physical installation of the Wireless Router.

•

Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.

•

The TCP/IP protocol must be installed on all PCs.

•

For Internet Access, an Internet Access account with an ISP is required (most commonly

with a DSL or Cable modem provider)

•

To use the Wireless Access Point, all Wireless devices must be compliant with the

IEEE802.11g specifications.

1. Choose an Installation Site

Select a suitable place on the network to install the Wireless Router.

Ensure the Wireless Router and the DSL/Cable modem are powered OFF.

Figure 3: Installation Diagram

Table of Contents