Virtual Servers Screen - Hawking HWR54G User Manual

Wireless Router User Guide
This address should be static, rather than dynamic, to make it easier for Internet users to
connect to your Servers.
However, you can use the DDNS (Dynamic DNS) feature to allow users to connect to your
Virtual Servers using a URL, instead of an IP Address.

Virtual Servers Screen

The Virtual Servers screen is reached by the Virtual Servers link on the Advanced screen. An
example screen is shown below.
This screen lists a number of pre-defined Servers, and allows you to define your own Servers.
Details of the selected Server are shown in the "Properties" area.
Data - Virtual Servers Screen
Servers
Servers
Properties
Enable
PC (Server)
Protocol
Figure 36: Virtual Servers Screen
This lists a number of pre-defined Servers, plus any Servers you
have defined. Details of the selected Server are shown in the
"Properties" area.
Use this to Enable or Disable support for this Server, as required.
•
If Enabled, any incoming connections will be forwarded to the
selected PC.
•
If Disabled, any incoming connection attempts will be blocked.
Select the PC for this Server. The PC must be running the
appropriate Server software.
Select the protocol (TCP or UDP) used by the Server.
58