Wireless Station Configuration - Hawking HWR54G User Manual

802.11g hi-speed wireless-g router with 4-port switch

Hide thumbs Also See for HWR54G:

Table of Contents

Wireless Router User Guide

Wireless Station Configuration

This section applies to all Wireless stations wishing to use the Wireless Router's Access Point,

regardless of the operating system which is used on the client.

To use the Wireless Access Point in the Wireless Router, each Wireless Station must have

compatible settings, as follows:

The mode must be set to Infrastructure.

Mode

SSID (ESSID)

This must match the value used on the Wireless Router. The default

value is default

Note! The SSID is case sensitive.

WEP

By default, WEP on the Wireless Router is disabled.

•

Note that the Wireless Router will automatically accept both 802.11b and 802.11g

connections, and no configuration is required for this feature.

If WEP remains disabled on the Wireless Router, all stations must

have WEP disabled.

If WEP is enabled on the Wireless Router, each station must use the

same settings as the Wireless Router.

Table of Contents