Radio Mode; Adjusting The Tuner Settings; Switching To Radio Mode; Rds Functions - Blaupunkt MUNCHEN MP36 Operating And Installation Manual

Radio cd mp3
Table of Contents

Advertisement

Available languages

Available languages

Radio mode

Adjusting the tuner settings

To ensure that the tuner works properly, the
device must be confi gured for the region
in which it is being used. You can choose
between Europe (EUROPE), United States
(USA), South America (S-AMERICA) and
Thailand (THAI). By default, the tuner is set
to the region in which the device was sold.
If you encounter problems with radio recep-
tion, please check this setting.
The radio functions described in these op-
erating instructions refer to the EUROPE
tuner setting.
u
Switch the device off using button 1.
u
Press and hold down the 1 and 5 buttons
; simultaneously and switch on the
device again by pressing button 1.
"TUNER" is displayed.
u
Select your tuner region using the
button 8.
To save the setting,
u
switch the device off and on again or
wait approx. 8 seconds. The car sound
system switches on and the mode that
was selected last is activated (radio,
CD/MP3, CD changer or AUX).

Switching to radio mode

If you are in CD/MP3, CD-changer or AUX
mode,
u
press the BND•TS button <
or
u
press the SRC
until the memory bank (e.g. "FM1") ap-
pears in the display.

RDS functions

This device is equipped with an RDS radio
receiver (Radio Data System). Many of the
receivable FM stations broadcast a signal
that not only carries the programme but also
additional information such as the station
name and programme type (PTY).
The station name appears in the display as
soon as the tuner receives it.
The convenient RDS functions AF (Alterna-
tive Frequency) and REGIONAL extend your
radio's range of functions.
AF: If the RDS function is activated, the
radio automatically tunes into the best
receivable frequency for the station
that is currently set.
REGIONAL: At certain times, some
or
radio stations divide their programme
into regional programmes providing
different content. You can use the REG
function to prevent the car radio from
switching to alternative frequencies
that are broadcasting different pro-
gramme content.
Note:
REGIONAL must be activated/deacti-
vated separately in the menu.
Switching the RDS function on/off
If you want to use the RDS functions (AF and
REGIONAL),
u
press and hold down the TRAF RDS but-
ton : for longer than two seconds.
Radio mode
button = repeatedly
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents