Clock Time - Blaupunkt MUNCHEN MP36 Operating And Installation Manual

Clock time

Clock time
Displaying the clock time
To display the clock time briefl y,
u
press and hold down the SRC
ton = until the clock time appears in
the display.
Setting the clock time
To set the clock time,
u press the MENU button 7.
u
Press the or
edly until "CLOCK SET" appears in the
display.
u button 8.
Press the
The clock time appears in the display. The
hours fl ash and can be adjusted.
u
Adjust the hours using the
tons 8.
Once the hours are set,
u press the button 8.
The minutes fl ash.
u
Adjust the minutes using the
tons 8.
u Press the MENU button 7 twice.
Selecting 12/24-hour clock
mode
u Press the MENU button 7.
"MENU" appears in the display.
u
Press the or
until "24 H MODE" or "12 H MODE" ap-
pears in the display.
52
but-
button 8 repeat-
but-
but-
button 8 repeatedly
u
Press the or
between the modes.
When you have fi nished adjusting the set-
ting,
press the MENU button 7.
u
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is off and
the vehicle ignition is on,
u press the MENU button 7.
"MENU" appears in the display.
u
Press the or
until "CLOCK OFF" or "CLOCK ON" ap-
pears in the display.
u
Press the or
between the ON/OFF settings.
When you have fi nished adjusting the set-
ting,
press the MENU button 7.
u
Briefl y displaying the time when
the device is switched off
To display the time briefl y when the device
is off,
u
press the SRC
The time is displayed for approx. 8 sec-
onds.
button 8 to switch
button 8 repeatedly
button 8 to switch
button =.