Storing Stations; Storing Stations Automatically (Travelstore); Listening To Stored Stations; Scanning Receivable Stations (Scan) - Blaupunkt MUNCHEN MP36 Operating And Installation Manual

u
Set the desired sensitivity using the
buttons 8.
When you have fi nished adjusting the set-
ting,
press the MENU button 7.
u
Note:
You can set different sensitivity
levels for FM and MW or LW (AM).

Storing stations

Storing stations manually
u
Select the memory bank that you want
(FM1, FM2, FMT) or one of the wave-
bands (MW or LW).
u
Tune into the station that you want.
u
Press and hold down one of the station
buttons 1 - 6 ; for longer than two
seconds to assign the station to that
button.
Storing stations automatically
(Travelstore)
You can automatically store the six stations
providing the best reception in the region
(only FM). The stations are stored in the FMT
memory bank.
Note:
Any stations previously stored in this
memory bank are deleted in the proc-
ess.
u
Press and hold down the BND•TS but-
ton < for longer than two seconds.
The storing procedure begins. "FM TSTORE"
appears in the display. After the process has
completed, the radio will play the station that
is stored in memory location 1 of the FMT
memory bank.

Listening to stored stations

u
Select the memory bank or waveband.
u Press the station button 1 - 6 ; that
corresponds to the station that you want
to listen to.
Scanning receivable stations
(SCAN)
You can use the scan function to listen to all
the receivable stations briefl y. You can set
the scanning time in the menu to between 5
and 30 seconds (in steps of 5 seconds).
Starting SCAN
u
Press and hold down the MENU button
7 for longer than two seconds.
Scanning begins. "SCAN" appears briefl y in
the display followed by a fl ashing display of
the current station name or frequency.
Cancelling SCAN and continuing
listening to a station
Press the MENU button 7.
u
Scanning stops and the radio continues play-
ing the station that it tuned into last.

Setting the scanning time

Press the MENU button 7.
u
u
Press the or
edly until "SCAN TIME" appears in the
display.
u
Set the desired scanning time using the
buttons 8.
Radio mode
button 8 repeat-
39