Traffi C Information; Radio Mode; Rds; Changing To Radio Mode Or Selecting A Memory Bank - Blaupunkt Concept Pro II Operating And Installation Instructions

Traffi c information | Radio mode

Traffi c information

In the reception area "EUROPE", an FM station can
identify traffi c reports by means of an RDS signal.
If priority for traffi c reports is switched on, a traf-
fi c report is automatically switched through, even
if the car sound system is currently not in radio
mode.
If priority is switched on, the display shows the
traffi c jam symbol (
during a switched-through traffi c announcement.
The priority is activated and deactivated in the
user menu (see the chapter "User settings", sec-
tion "Making settings in the "TUNER" menu", menu
item "TRAFFIC").
Notes:
• The volume is increased for the duration
of the switched-through traffi c announce-
ment. You can adjust the minimum volume
for traffi c announcements (see the chapter
"User settings", section "Making settings
in the "VOLUME" menu", menu item "TA
VOLUME").
• To cancel a switched-through traffi c an-
nouncement, press the SRC button

Radio mode

RDS

Many FM stations broadcast an RDS (Radio Data
System) signal in addition to their programme
in the reception area "EUROPE" that allows the
following additional functions:
• The station name is shown on the display.
• The car sound system recognises traffi c an-
nouncements and news broadcasts and can
automatically switch them through in other
operating modes (e. g. in CD mode).
• Alternate frequency: If RDS is activated, the car
sound system automatically selects the best
receivable frequency for the station that is cur-
rently set.
• Regional: At certain times, some radio sta-
tions divide their programme into regional
programmes providing diff erent content. If
24
). "TRAFFIC" is displayed
1
.
the REGIONAL function is activated, the car
sound system changes only to those alternate
frequencies on which the same regional pro-
gramme is being broadcast.
The functions RDS and REGIONAL are activated
and deactivated in the user menu (see the chap-
ter "User settings", section "Making settings
in the "TUNER" menu", menu items "RDS" and
"REGIONAL").
Changing to radio mode or selecting
a memory bank
The following memory banks are available in the
diff erent reception areas:
Region Memory banks
EUROPE FM1, FM2, FMT, MW
USA FM1, FM2, FMT, AM, AMT
S-AMERICA FM1, FM2, FMT, AM, AMT
THAILAND FM1, FM2, FMT, AM, AMT
u Press the SRC button
desired memory bank is displayed.
Notes:
• Up to 5 stations can be stored in each
memory bank.
• Memory banks can be activated or deacti-
vated via the user menu (see the chapter
"User settings", section "Making settings
in the "TUNER" menu", menu item "TUN
BAND" (band selection)). Deactivated
memory banks are skipped during the
source selection with the SRC button

Tuning into a station

There are various ways of tuning into a station:
Tuning into stations manually
u Briefl y press the
several times to change the frequency in in-
crements, or long to quickly change the fre-
quency.
1
repeatedly until the
1
7
/ button once or
.