Assembly - ProForm 605 Hr Elliptical User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the
included hex keys and your own a phillips screwdriver
and rubber mallet
As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.
The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on
page 22. The second number refers to the quantity used in assembly. Note: Some small parts may have been
pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.
Wave Washer
(95)–2
M4 x 16mm
Screw (66)–2
M8 x 25mm Patch
Screw (22)–2
M8 x 45mm Button Bolt (50)–4
.
M10 Split
Washer (70)–6
Frame Spacer (83)–1
M10 x 27mm
Screw (71)–3
M10 x 112mm Carriage Bolt (34)–4
, adjustable spanner
M10
Washer (38)–6
M8 Nylon
Locknut (46)–4
Adjustment Bolt (20)–2
M10 x 78mm Button Bolt (27)–2
M10 x 90mm Button Screw (63)–1
4
,
M8.5
Washer (53)–2
M10 Nylon
Locknut (29)–6