Cisco UCS C460 M2 User Manual page 9

Table 1 Capabilities and Features (continued)
Capability/Feature
Power subsystem
Fans
Integrated management
processor
Cisco UCS C460 M2 High-Performance Rack-Mount Server
Description
Either 2 or 4 850 W power supplies
■
Power supplies are hot-swappable, rear-accessible, and redundant as
■
2+2 or 3+1
NOTE: You can use 2 power supplies with a 2-CPU configuration. In
this case, 1+1 redundancy is supported only if your server's overall
power consumption can be supported by a single 850W power supply
during the failure and hot-swap. For more information about your
server's power consumption, use the power calculator accessible at
http://www.cisco.com/assets/cdc_content_elements/flash/dataC
enter/cisco_ucs_power_calculator/
Chassis:
8 fans, hot-swappable
■
Power supply:
Each of the 4 power supplies is equipped with a fan.
■
The built-in Cisco Integrated Management Controller (CIMC) GUI or CLI
interface enables you to monitor the server inventory, health, and system
event logs.
BASE SERVER STANDARD CAPABILITIES and FEATURES
9