Mounting On An Arm - Olympus PFL-01 Instruction Manual

3)Mounting on an arm

This case can be mounted on a commercially available arm or
similar tool as described below.
When using a commercially available arm with a width of 12 mm,
mount the provided arm-attaching adapter in the direction shown in
below. When using an arm with a width of 10 mm, mount
adapter in the direction shown in
Insert the commercially purchased arm into the arm mount, and
then tighten the arm by inserting and turning the provided arm
mount screw all the way clockwise.
CAUTION
: • The arm mount of this case has an interval of 12 mm.
Use care when mounting it on a commercially
purchased arm.
• Do not tighten the arm mount screw with excessive
force.
below.
E-14