Insertion Of Silica Gel - Olympus PFL-01 Instruction Manual

Insertion of silica gel

Before closing the case, place the provided bag of silica gel (to
prevent fogging) between the right side panel of the flash and the
case. Insert the bag with the longer, glued side first.
CAUTION
: • Insert the silica gel all the way at the specified location and
with the specified orientation. When the orientation is not
correct, the silica gel bag will be caught when the Case is
sealed and water leakage will be caused.
• Attempting to seal the Case with the bag inserted only part of
the way will cause the silica gel bag to get caught by the O-ring
and water leakage will occur.
• Once silica gel has been used, the moisture absorption
performance will be impaired. Always exchange the silica
gel when the Case is opened and closed.
E-18