Batteries - Olympus PFL-01 Instruction Manual

Underwater case for the electronic flash fl-20
Table of Contents

Advertisement

5. Rough handling, such as jumping into the water with the case in
your hand or in an outside pocket or throwing the case into the
water could lead to water penetration. Please always take care
when using the case.
6. If the electronic flash contained in the case gets wet, wipe off all
moisture immediately and check the flash is working correctly.
7. Before traveling by air, please make sure you remove the O-rings,
otherwise the difference in air pressure may make it impossible to
open the case.
8. To ensure safe and trouble-free handling and operation of the
electronic flash in this product, please read the flash's instruction
manual carefully.
9. When sealing this product, please take care to ensure no foreign
matter such as sand, dirt or hair is on the O-rings or contact
surfaces.
10.Before storing this product, always be sure to take out the flash.
11.When using this product, do not fire the flash at close range to a
person or animal.

Batteries

● To supply power to the electronic flash, we recommend you use
two LR6 alkaline batteries, two lithium batteries, two Ni-Mn
batteries, two Ni-Mh batteries or two Ni-Cd batteries.
● Keep the batteries' contacts away from damp and humidity to avoid
impairing performance and/or causing an accident.
● For other battery handling precautions, please read the relevant
sections in the electronic flash's instruction manual.
E-3

Advertisement

Table of Contents
loading

Table of Contents