Disconnecting The Ttl Cable; Drying The Case And Ttl Cable - Olympus PFL-01 Instruction Manual

Disconnecting the TTL cable

After making sure that the case
and TTL cable are free of water
drops, loosen the lock dial screw
and disconnect the TTL cable.
CAUTION
: • Do not apply excessive force when disconnecting the TTL cable.
• Make sure that no foreign matter such as dirt is attached to the
O-ring of the connector. Should any foreign matter be attached
to it, wipe it clean with a clean, lint-free cloth.
• Be sure to attach the cap to the TTL cable connector after
disconnecting the cable.

Drying the case and TTL cable

After washing the case and TTL cable, dry them with a clean, soft,
lint-free cloth. Then, leave them to dry completely in a well-ventilated
location protected from direct sunlight.
CAUTION
: • Never use hot air from a hair dryer or other appliance to dry the case
and TTL cable, and never place them in direct sunlight to dry. This
could deteriorate or deform the case, TTL cable and O-ring and lead
to water penetration. When wiping the case, take care not to scratch it.
E-25