Mounting And Removing The Lens Cap; Perform The Final Checks; Visual Inspection - Olympus PT-033 Instruction Manual

Mounting and Removing the Lens Cap

Fit the lens cap onto the lens
ring as shown in the figure. Be
sure to remove the lens cap
before shooting.

Perform the final checks.

Visual Inspection

After sealing the Case, check the sealing part of front and rear lid
visually to confirm that the O-ring is not twisted or out of the groove
and that no foreign matter has been caught.
CAUTION
: • Hairs, fibers, and other narrow items are not very apparent,
but they may cause entry of water, so that special attention
is required.
E-22