System Operation; To Turn The System On And Leave - FBII OMNI-408EU User Manual

System Operation

You can turn the burglar portion of your security system on and off.
Before you can turn the system on, it must be "ready." If you have a
protected door open, or if someone is moving in view of a motion
detector, the system will not display "READY."
The system is ready if the READY LED is lit and the display shows:
LCD Keypad:
SYSTEM READY
NOTE: If programmed by your installer, you may arm the system if a
delay or interior zone is faulted. However, faulted zones must be
restored before your exit time expires or an alarm or zone bypass will
result. Ask your installer if your system has this feature and, if so, if it
causes an alarm or zone bypass.

To Turn the System On and Leave

Enter your User Code.
The ARMED LED goes on and the display shows:
LCD Keypad:
ON: AWAY
Exit through a door designated by your installer as an exit/entry door.
You must leave within the exit time programmed by your installer.
Refer to the reference sheet for the time that has been set for your
system.
System Operation
Fixed-Word Keypad:
READY LED lit
Fixed-Word Keypad:
ARMED LED lit
– 9 –