System Operation - FBII LEGEND SERIES Owner's Manual

9- AC INDICATOR
This light indicates that AC power is connected to the Security
System. Battery backup exists to operate the system in the event
of a power failure.
10- ARM/DISARM INDICATOR
This light indicates whether the system is currently ARMED
(ON) or DISARMED (OFF). In addition to this constant visual
indication, the zone indicator lights will provide additional
information concerning the current zone status. This light will also
blink if there is a visual alarm condition present.
11- STAY Key
The STAY key is used to activate (arm) the system with the
exception of interior protection. This will provide exterior protection
of your location while allowing full access through the location. This
mode would be used when arming the system and you might be
walking through protected interior zones.
12- - BYPASS Key
The BYPASS key will be used to temporarily turn off protection
of a portion of your burglary protection. This could be performed,
for example, to ignore an open window which would prevent the
arming of your system.
13- INSTANT Key
The INSTANT key is used to activate (arm) the system and
eliminates the entry delay. This would cause an immediate alarm if
someone came through an exit/entry zone.
14- CODE Key
Function key used when entering or changing the User access
codes of your system.
5

SYSTEM OPERATION

Throughout the users manual the following notation will be used
to describe actions taken at the LEGEND-100 keypad;
BY PASS
INSTANT
STAY
CODE
[USER]
*
#
+
Function key labelled BYPASS
Function key labelled INSTANT
Function key labelled STAY
Function key labelled CODE
Entry of your four digit user code
Key labelled * (to the left of 0)
Key labelled # (to the right of 0)
Indicates the simultaneous
entry of two keys. For example,
# + 3, indicates that the # and 3
keys should be pressed at the
same time.