FBII OMNI-408EU User Manual page 30

Glossary (cont'd)
ENTRY DELAY: The period of time allowed between opening a designated
entry/exit door and turning off the alarm system before the system registers
an alarm condition. This time is determined at the time of installation. Your
system supports two entry times, allowing you to have a different length of
time for different doors.
EXIT DELAY: The period of time allowed between turning the system on
and leaving through a designated exit/entry door. This is determined at the
time of installation.
INTERIOR ZONE: A group of points that protects the interior of your
premises. You may want to turn the perimeter portion of your system on
while leaving the interior zones off, allowing you to move freely inside,
opening interior doors and passing by motion detectors without causing an
alarm.
KEYPAD: A keypad is your link to your system. It displays alarm and
trouble messages, shows faulted zones, and allows you to turn the system
on/off by using the keys. Your system has one or more keypads.
ON/OFF: These terms refer to the burglary portion of your security system.
There are several operation levels that allow you to protect part of your
premises while you remain inside. Fire and other emergency and
environmental sensors are always active and ready, and are not affected in
any way by turning the burglary portion of your security system on or off.
"Armed," a term that is sometimes used, means "system on". "Disarmed"
means "system off." See ON-INSTANT, ON-STAY, and STAY.
ARM LED: Red LED in the upper portion of the keypad. When lit, some
part of the burglar alarm system is on; when not lit, the burglary portion of
the system is off.
ON-STAY: A system setting that turns on the perimeter protection of the
building but allows movement throughout the inside.
PANIC BUTTON: A pushbutton that allows you to signal the central
station that you need immediate assistance. Your system has programmable
Keypad Send Help Alerts that can also serve as Panic buttons.
– 30 –