Table of Contents
Advertisement
72 electrolux what to do if ...
What to do if ...
Problem
The oven does not heat
up
The oven lighting is not
operating
The pyrolysis function is
not working ("C1" is
shown in the time display)
The pyrolysis function is
not working ("C3" is
shown in the time display)
The oven does not heat
up. Time
F11 appears in the clock
display
F2 appears in the clock
display
The oven is not switched on Switch the oven on
The clock is not set
The required settings have
not been set
The oven's automatic cut-
out has been triggered.
The fuse in the house's elec-
trical wiring (fuse box) has
been tripped
The oven bulb is faulty
Side rails/oven shelf runners
have not been removed
Door not properly closed or
door lock defective
Demo mode is on
is lit
The meat probe has short
circuited or the plug of the
meat probe is not firmly in
position in the socket
Door not properly closed or
door lock defective
Possible cause
Remedy
Set the current time on the
clock
Check the settings
See Automatic cut-out
Check fuse. If the fuses trip
repeatedly, please call an au-
thorised electrician
Change the oven bulb
Remove side rails/oven shelf
runners
Close door properly
Keep Selection
pressed for 2 seconds, then
within 2 seconds press and
hold buttons Selection
and
for 2 seconds
Insert the plug of the meat
probe as far as it will go into
the socket on the side wall of
the oven
Close door properly;
Turn the appliance off and on
again via the house fuse or
the safety switch in the fuse
box;
If displayed again, please
contact the Customer Care
Department
button
Advertisement
Table of Contents
