FALCOM NAVI-1/XT User Manual page 23

NAVI-1/NAVI-XT
For more details about Bluetooth™, please refer to the software manual
that you are currently using.
8. The aforementioned icon will change its colour from grey to green as
shows in the figure below. The service which the NAVI-1 offers is also
shown below.
9. In order to see the signal strength of Bluetooth™ connection, right-click
on its icon, on the next appeared pop-up menu select the Status item.
The signal strength is at the bottom of the appeared screen indicated. Try
experimenting with your Bluetooth™ GPS receiver to see how far it
needs to be before the blue bar reaches. If the user right-clicks the icon
again and selects the Properties item an available COM Port is selected.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
VERSION 1.06
Page 23