Hp Array Configuration Utility - HP 634041-006 Deployment Manual

HP Array Configuration Utility

The Array Configuration Utility (ACU) is a host-based, browser-accessed tool for configuring,
managing, and monitoring MDS600, D6000 and D2600/D2700 storage. The ACU is supported
for use in Windows, Linux, and NetWare environments and can run locally from the server or
remotely through HP Systems Insight Manager (HP SIM).
The ACU:
Is available in both a graphical user interface and a command line interface.
Allows the setting of access rights to storage by hosts.
Supports local or remote access.
NOTE: When creating arrays using the graphical user interface, the ACU provides easy-to-use
configuration wizards and suggested settings. Consider these defaults (especially the RAID level
and rebuild priority) and make sure that they are acceptable according to your plans.
For information about using the ACU, see the ACU section of the Configuring Arrays on HP Smart
Array Controllers Reference Guide. This guide is available on the Support page of the ACU website:
http://h18000.www1.hp.com/products/servers/proliantstorage/software-management/acumatrix/.
44 Software information