Key Installation Steps - HP 634041-006 Deployment Manual

Key installation steps

Step 1
Step 2
Step 3
Step 4 and Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 1 1
Step 12
Step 13
Step 14
Set up the rack.
Install tape library or autoloader (optional).
Install controller cards on the server blades.
Install BladeSystem c-Class enclosure and its servers, interconnect devices, and other
components. Install operating system updates and patches, and, if necessary, update firmware
on the HP controllers and interconnect devices.
For each server that will boot locally (not use the storage enclosure as a boot device), install
the operating system.
Install MSA 2040 SAS or P2000 G3 SAS MSA controller and drive enclosures. If necessary,
update the firmware.
Install MDS600 or D6000 storage enclosures. If necessary, update the firmware.
Install D2600/D2700 storage enclosures. If necessary, update the firmware.
Configure zoning on the switch.
Restart servers.
Configure the MSA 2040 SAS or P2000 G3 SAS MSA controllers and its storage.
Configure the MDS600 or D6000 and its storage.
Configure the D2600/D2700 and its storage.
Key installation steps 53