Call Handover; Call Waiting - BT DIVERSE ISDN User Manual

Call handover

When you have a multibase system (see
System Set-Up Guide) during an external
call you can wander out of the range of
one base station and into the range of an
adjacent one without losing your call.
Handover operation depends on the
HOLD ISDN Supplementary Service,
please consult your service provider
regarding availability and cost.
To use call handover
When approaching the range
limit of the base station during an
external call you will hear 4 beeps.
When using a multibase multicell
system an option to change base
stations becomes available if the
handset is within range of two
base stations it is registered with.
Remember to warn the other
person that there will be a short
break in the conversation whilst
you change bases.
#
Press the
#
Resume the call.
button.

Call waiting

To answer a waiting external call whilst on
an internal or external call
Press buttons in order shown
When on an internal or external
call and another external call
comes through, you will hear call
waiting tones and get a call
waiting message on the display if
you are in its call group.
You will now have 3 options.
1. Reject the call.
Press the
STO
STO
# button.
#
WXYZ Press the
9
9
button.
ABC 2
2
Press the
STO
STO
has now been rejected. Other
extensions in the call group will
still ring and can answer the call.
2. Accept the call.
Press the
STO
STO
close your current internal call or
put on hold your current external
call. You will now be able to speak
to the waiting call.
3. Close the current call.
Press
END CALL
will now ring provided another
extension has not answered the
waiting call.
Press
PHONE
waiting call.
button then the
button then the
button. The call
button. This will
. Your handset
to answer the
31