Isdn Customer Controlled Call Forwarding - BT DIVERSE ISDN User Manual

Press
NEXT
NEXT
desired destination.
Press . You now have to set
OK
OK
the number of ring cycles your
handset should receive before the
call gets forwarded. Display shows
a menu listing all possible settings
with ACT in front of the active
setting.
Press
NEXT
NEXT
desired setting.
Press
SAVE
SAVE
change or
or OK
active setting.
OK
To switch internal call forwarding off
Press buttons in order shown
Press the
PHONE
will show FNCT.SET.ACT to indicate
at least one system function such
as call forwarding has been set.
Press the
MENU
Menu item SYSTEMFUNCT.SET. is
highlighted.
Press . Menu lists all functions
OK
OK
that have been set.
Press
NEXT
NEXT
FORWARD.
Press . Display shows where
OK
OK
internal call is set to forward to.
Press to switch off internal
OFF
OFF
call forwarding.
to highlight the
to highlight the
to confirm the
if keeping the
button. Display
button.
to highlight INT.CALL
ISDN Customer Controlled
Call Forwarding
This enables you to forward an external
call to another external number.
There are 3 types of external call
forwarding:
– all calls
– on busy
– on no reply (after 5 rings).
These options work for both Point-to-
Multipoint and Point-to-Point connections.
When in Point-to-Multipoint mode
external call forwarding is not available
until MSNs have been set up.
IMPORTANT!
Please check with your ISDN service
provider if the Customer Controlled
External Call Forwarding
Supplementary Service is supported.
Please also check the cost of the
service and calls before using the
service.
21