Select The Drying Program; Start Time Pre-Selection - Electrolux EDC 5375 Operating Instructions Manual

Select the drying program

1. Select the suitable drying program using the pro-
gram selector (see "Program tables").
2. If required, select the button AUDIBLE SIGNAL
(SIGNAL) or SPECIAL CARE (SCHON).
• AUDIBLE SIGNAL (SIGNAL) button
• During the crease-protection phase (immediately
after the drying process), an acoustic signal is
sounded at certain intervals (see "End of drying
process").
• SPECIAL CARE (SCHON) button
• This program operates with reduced heat. Press
the SPECIAL CARE (SCHON) button for fabrics
bearing the care symbol S. Gentle drying is
advisable for heat-sensitive fabrics (such as
acrylic and viscose).

Start time pre-selection

With the start time pre-selection you can program the
start delay of the drying program in the range from
1 to 19 hours.
1. Setting the program.
2. Hold the DELAY TIMER (ZEITVORWAHL) button
depressed
until the desired number of hours of delay
of the program start appears in the display
field for PROG. TIME (LAUFZEIT).
3. Press the START/PAUSE (START/PAUSE) but-
ton.
After elapse of the set number of hours the dryer
automatically starts the set drying program. The
PROG. TIME (LAUFZEIT) display field shows the
number of hours after which the drying program
will start.
You can correct the pre-selected start delay time
at any time.
13