How To Use Your Tumble Dryer; Options; Starting Drying Cycle; End Of Drying Cycle - Electrolux EDC 503 M Instruction Booklet

Hide thumbs Also See for EDC 503 M:
Table of Contents

Advertisement

HOW TO USE YOUR TUMBLE DRYER

Before using your tumble dryer for
the first time
There may be dust or dirt inside a brand new tumble
dryer. Place a few damp cloths inside the appliance
and dry for approximately 20 minutes.

1. Loading laundry

Open door by pressing the appropriate button. Load
spun laundry. Do not press laundry in appliance. Close
door making sure that there are no laundry items
preventing the door from being closed.

2. Select drying time

Turn dial clockwise until the desired drying time is
under the symbol on the front panel. The mains-on
light will then light up.
3. Press "low temperature" button,
if necessary.
M0030
4. Start programme
Press start button; the appliance will start functioning.
The selected drying time may also be changed after
the programme has started. In order to do this, re-set
dial and depress start button again.
5. End of cycle
P0885
When the selected cycle has come to an end, the
tumble dryer will stop and the mains-on light will
switch off automatically. The selector dial will return
to the 'zero' position.
Open door and take out cooled laundry.
IMPORTANT! Clean filter and empty water
container after every drying programme.
20

Advertisement

Table of Contents
loading

Table of Contents