Start The Drying Program; Removing Laundry Or Loading Laundry When Necessary; End Of The Drying Process; Removing The Laundry - Electrolux EDC 5375 Operating Instructions Manual

Start the drying program

1. Press the button
PAUSE).
The drying programme begins. You can check the
progress of the drying procedure in the pro-
gramme progress display.

Removing laundry or loading laundry when necessary

You can interrupt the drying process at any time to
remove some of the laundry or to add more laundry.
1. Open the door.
Caution! The laundry and the drum may be
1
hot.
2. Remove or add more laundry.
3. Close the door.
4. Press the START/PAUSE (START/PAUSE) button
to resume the drying process.

End of the drying process

The cooling phase starts shortly before the end of
the drying process: The heater is switched-off during
this phase. After the cooling phase the END (ENDE)
and CREASE GUARD (KNITTERSCHUTZ) display is
illuminated. You can now remove the washing from
the tumble dryer.
The crease guard phase follows automatically after
the drying process. For 30 minutes the drum rotates

Removing the laundry

1. Open the door and remove the laundry.
14
START/PAUSE (START/
intermittently. This keeps your laundry loose and
crease-free.
If you have pressed the AUDIBLE
(SIGNAL) button, an acoustic signal is sounded inter-
mittently during this phase.
You should remove the washing at the latest towards
the end of the anti-crease phase to avoid creasing.
SIGNAL