Control Panel - Electrolux EDC 5375 Operating Instructions Manual

Control panel

A
A Program selector: for setting the drying program
B Drying degree indicator: Shows the achieved
extent of drying; this enables you to take-out indi-
vidual pieces of laundry at the right time during the
drying process.
C Buttons and display block
– AUDIBLE SIGNAL (SIGNAL) button: When
switched-on, an audible signal is sounded at
the end of the drying program; then take-out
the laundry
– SPECIAL CARE
sensitive fabrics.
– START/PAUSE (START/PAUSE) button: To
start or interrupt a programme.
– DELAY TIMER (ZEITVORWAHL) button: For
pre-setting the start time in the range from 1 to
19 hours; indication in the PROG. TIME
(LAUFZEIT) display field
– Multi-display/Display
(LAUFZEIT): Indicates the probable program
duration or the time remaining of the currently
set drying program;
with postponed start time (DELAY TIMER
(ZEITVORWAHL) button) indication of the
number of hours left until the drying program
starts; an error code is displayed in the case of
a disturbance (C and a number).
D Program run display: The currently running phase
of the drying process is indicated.
E Instructions for the user:
– Indication CONDENSER
SCHER): Clean the condenser!
– EMPTY WATER (BEHÄLTER) display: Empty
the water reservoir!
– CLEAN FILTER (SIEB) display: Clean the fluff
filter!
Note: The indicators are extinguished only after the
programme is switched off.
B
(SCHON) button: For
PROG. TIME
(WÄRMETAU-
C D
E
9