Drying Sequence; Load The Laundry; Select The Required Option; Select The Drying Time - Electrolux EDE 425 M Instruction Booklet

Table of Contents

Advertisement

i

Drying sequence

Before starting up for the first time it is advisable
lo load a few moist cloths into the dryer and to let
it run for about 20 minutes. This ensures that no
dust and dirt is left in the drum.

1. Load the laundry

Open the door by pulling the catch forwards.
Load the items one at a time, shaking them out
loosely and close the door.
Please check the laundry does not get caught
between the door and filter.

2. Select the required option

Depress Cool Tumbling or Low Temp. Buttton, if
desired.

3. Select the drying time

Turn the selector dial clockwise to the desired
time, in the high or low temperature section,
depending on the laundry: the mains-on light
illuminates and the machine starts operating.

4. When drying is completed

The machine stops automatically, the mains-on
light goes out.
If the laundry is still too damp, select a further
brief drying time, bearing in mind that during the
last 8 minutes the dryer carries out the cooling
and anti-crease treatment phase.
Clean the filter after every drying programme.
A clean filter ensures correct functioning of
the appliance.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents