Pyrolytic Cleaning - Electrolux EOC 6620 Operating Instructions Manual

Pyrolytic cleaning

1
Caution! The oven becomes very hot during
this process. All young children must be kept
at a safe distance.
1
Important! All removable parts including the
side rails must be removed from the oven be-
fore using the pyroluxe function.
3
If you are using any other removable oven ac-
cessories, these must be removed before the
pyrolytic cleaning process.
1. Remove any large pieces of dirt by hand.
2. Set the Oven Function selector to P Pyrolysis.
3. Turn the temperature selector to the right until it
comes to the end stop. Pyrolysis will start after a
few seconds, and will switch itself off automatically
after 2 hours and 30 minutes.
3
During the process, the oven door is locked
and oven lighting is off. The temperature indi-
cator light remains on until the door is released
(approx. 45 min.).
4. When the pyrolytic process is completed, turn all
controls to the Zero position.
5. After it has cooled down, wipe the oven with a soft
cloth.
31