What To Do If - AEG BY9004000 User Manual

Aeg bilt-in oven
Table of Contents

Advertisement

Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch off the circuit breaker.
Put a cloth on the bottom of the oven for protection of the oven light and glass cover.
Replacing the oven lamp
1. You can find the lamp glass cover at the back of the cavity.
Turn the lamp glass cover counterclockwise to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with applicable 300°C heat-resistant oven lamp.
Use the same oven lamp type.
4. Install the glass cover.
Replacing the oven lamp:
1. You can find the lamp glass cover at the left side of the cavity.
Remove the left shelf rail.
2. Use a narrow, blunt object (for example a
teaspoon) to remove the glass cover.
Clean the glass cover.
3. If necessary, replace the oven lamp with
applicable 300°C heat-resistant oven
lamp.
Use the same oven lamp type.
4. Install the glass cover.
5. Install the left shelf rail.

WHAT TO DO IF...

WARNING!
Refer to "Safety information" chapter.
Problem
The oven does not heat
up
The oven does not heat
up
Possible cause
The oven is switched off
The necessary settings are not set
What to do if...
Remedy
Activate the oven
Check the settings
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bp5003001

Table of Contents