AEG BY9004000 User Manual page 34

34
Care and cleaning
2. Hold the door t (B) on the top edge of the
door at the two sides and push inwards to
release the clip seal.
3. Pull the door t to the front to remove it.
4. Hold the door glass panels on their top
edge one by one and pull them up out of
the guide
5. Clean the door glass panels.
To install panels follow the procedure in re-
verse. Install the smaller panel first, then the
larger.
Shelf support
You can remove the shelf support to clean the side walls.
Removing the shelf support
1. Pull the front of the shelf support away
from the side wall.
2. Pull the shelf support from the back of
the side wall to remove it.
To install the shelf support follow the proce-
dure in reverse.
Valid with telescopic runners:
The retaining pins on the telescopic shelf run-
ners must point to the front!
Oven lamp
WARNING!
There is a danger of electrical shock!
B
2
1