Rear Shock Absorber Adjustment - Yamaha Thundercat YZF600R Owner's Manual

Rear shock absorber
adjustment
This shock absorber is equipped with
spring preload and damping force ad-
justers.
CAUTION:
@
Never attempt to turn an adjuster
beyond the maximum or minimum
setting.
@
INSTRUMENT AND CONTROL FUNCTIONS
EAU01592*
EC000015
1. Spring preload adjusting ring
2. Position indicator
Adjusting spring preload
Turn the adjusting ring in direction a to in-
crease spring preload and in direction b
to decrease spring preload.
Make sure that the appropriate notch in
the adjusting ring is aligned with the po-
sition indicator on the rear shock ab-
sorber.
CI-15E
Soft
Adjusting
1 2
position
1. Rebound damping force adjusting knob
2. Position indicator
Adjusting rebound damping force
Turn the adjusting knob in direction a
to increase rebound damping force and
in direction b to decrease rebound
damping force.
CI-29E
Maximum (hard)
* From the fully turned-in position
Stan-
Hard
dard
3 4 5 6 7
3-18
Minimum (soft) 20 clicks out*
Standard 10 clicks out*
0 click out*
3