Idle Speed Adjustment; Throttle Cable Free Play Inspection - Yamaha Thundercat YZF600R Owner's Manual

Idle speed adjustment

1. Start the engine and warm it up for
a few minutes at approximately
1,000 to 2,000 r/min. Occasionally
rev the engine to 4,000 to
5,000 r/min. The engine is warm
when it quickly responds to the
throttle.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU00632
1. Throttle stop screw
2. Set the idle to the specified engine
speed by adjusting the throttle
stop screw. Turn the screw in di-
rection a to increase engine
speed and in direction b to de-
crease engine speed.
Standard idle speed:
1,200 ~ 1,300 r/min
NOTE:
@
If the specified idle speed cannot be
obtained by performing the above ad-
justment, consult a Yamaha dealer.
@
a. Free play
Throttle cable free play
inspection
There should be a free play of 3 ~
7 mm at the throttle grip. If the free play
is incorrect, ask a Yamaha dealer to
make this adjustment.
6-18
EAU00635
6