Tail/Brake Light Bulb Replacement; Turn Signal Light Bulb Replacement; Front Wheel Removal - Yamaha Thundercat YZF600R Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Screw ( 2)
Tail/brake light bulb
replacement
1. Remove the screws and the lens.
6 2. Remove the defective bulb by
pushing it inward and turning it
counterclockwise.
3. Install a new bulb by pushing it in-
ward and turning it clockwise.
4. Install the lens and tighten the
screws.
CAUTION:
@
Do not over-tighten the screws as
the lens may break.
@
1. Screw
EAU01623*
Turn signal light bulb
replacement
1. Remove the screw and the lens.
2. Remove the defective bulb by
pushing it inward and turning it
counterclockwise.
3. Install a new bulb by pushing it in-
ward and turning it clockwise.
4. Install the lens and tighten the
screw.
EC000108
1. Speedometer cable
2. Front fender bolt ( 4)
EAU01095
3. Front fender
4. Caliper bolt ( 2)
5. Brake hose holder

Front wheel removal

@
@
1. Remove the speedometer cable
2. Remove the front fender bolts and
6-35
WARNING
It is advisable to have a Yamaha
dealer service the wheel.
Securely support the motor-
cycle so there is no danger of it
falling over.
from the front wheel side.
front fender.
EAU01252*
EW000122